Zoho CRM Custom Modules: How to Build and Configure Them Step by Step
Build and configure custom modules in Zoho CRM step by step. Extend your CRM beyond…
Most accounting software handles invoices and bank feeds well. Fixed asset management is where gaps tend to appear: assets added at cost with no depreciation running, disposals recorded as a lump expense, or a register maintained in a separate spreadsheet that nobody updates. The Zoho Books fixed assets module closes those gaps by tracking every asset from acquisition through disposal, calculating depreciation automatically, and feeding the results directly into your general ledger. This guide covers the complete setup: adding assets, choosing depreciation methods, recording disposals and write-offs, running asset reports, and the GST considerations that matter for Indian businesses. Whether you manage ten laptops or five hundred pieces of plant and machinery, the same configuration steps apply. For context on the broader Zoho Books accounting platform and what it covers beyond fixed assets, start with the product overview before working through the steps below.

The Fixed Assets module sits inside Zoho Books under the Accountant menu. It provides a dedicated register for capital items: physical assets like machinery, vehicles, computers and furniture, as well as intangible assets like software licences and patents that require amortisation. The module is separate from ordinary expenses. When you record a laptop as an expense, it flows directly to your profit and loss account. When you record it as a fixed asset, it appears on your balance sheet at cost, and depreciation charges flow to the P&L over the asset’s useful life.
Core functions the module handles:
The module becomes worth activating once your business capitalises assets above a defined threshold consistently. Most businesses use a capitalisation threshold of 5,000 to 25,000 rupees (or the equivalent in other currencies), below which items are expensed outright. Anything above that threshold that has a useful life beyond one accounting year belongs in the fixed asset register.
A common question is whether short-lived items like phone accessories or small tools should be capitalised. The answer depends on your capitalisation policy and local accounting standards. Under IFRS and Ind AS, the key test is whether the item generates future economic benefits over more than one period. If yes, capitalise it. If the cost is below your policy threshold or the item will be consumed within 12 months, expense it. Zoho Books supports both paths: items below threshold go through the standard expense or bills workflow, while qualifying assets go through the fixed assets module.
To add a fixed asset, go to Accountant > Fixed Assets > New Asset. The form requires several fields that directly affect how depreciation calculates and how the asset posts to your chart of accounts.
| Field | What to Enter | Why It Matters |
|---|---|---|
| Asset Name | Descriptive name including model/serial where relevant | Appears in register and on journal entries |
| Asset Type | Choose from configured types (e.g. Computer Equipment, Vehicles) | Determines depreciation method and rate defaults |
| Purchase Date | Date the asset was acquired or placed in service | Start date for depreciation calculation |
| Cost | Total acquisition cost including freight, installation, taxes (excluding recoverable GST) | The depreciable base before salvage value |
| Salvage Value | Estimated residual value at end of useful life | Depreciation stops when net book value reaches this figure |
| Useful Life | Expected years of productive use | Drives the straight-line rate and sum-of-years calculation |
| Depreciation Method | Straight-line, declining balance, or sum-of-years-digits | Determines the depreciation curve over the asset’s life |
Before adding individual assets, configure your asset types under Settings > Fixed Assets. Each asset type maps to three accounts: the fixed asset account (balance sheet), the accumulated depreciation account (balance sheet, credit), and the depreciation expense account (P&L, debit). Setting this up correctly at the type level means every asset in that category posts to the right accounts automatically.
Typical asset type structure for a small business:
When you record the original purchase of an asset through a vendor bill, you can link it to an existing asset record or create the asset directly from the bill line. This keeps your accounts payable in Zoho Books consistent with the asset register: the bill records the liability and payment, while the fixed asset module tracks the capitalised cost.
Zoho Books supports three depreciation methods. Your choice depends on accounting policy, tax requirements, and the pattern in which the asset generates economic benefits.
Straight-line spreads the depreciable cost evenly over the useful life. Formula: (Cost minus Salvage Value) divided by Useful Life in years. A server purchased at 120,000 with a salvage value of 10,000 and a 5-year life produces annual depreciation of 22,000. This is the most common method for assets that generate consistent output over their life: office furniture, computers, and fixtures typically use SLM. Under the Companies Act 2013 in India, Schedule II specifies useful life by asset class, and most Ind AS preparers default to SLM.
Declining balance applies a fixed percentage rate to the net book value (cost minus accumulated depreciation) each period. Because the base shrinks each year, the charge is higher in early years and lower later. This matches assets that generate more value early in their life or that carry higher obsolescence risk, such as vehicles and IT equipment. Indian tax law (Income Tax Act) mandates Written Down Value (WDV) rates by asset block, so businesses maintaining separate books for tax will often use WDV in the tax register and SLM in the statutory register.
SYD is an accelerated method that distributes depreciation in proportion to the remaining useful life. For a 5-year asset, the sum of digits is 15 (5+4+3+2+1). Year one gets 5/15 of the depreciable base, year two gets 4/15, and so on. It front-loads more depreciation than SLM but less than aggressive declining balance rates. SYD suits assets where output genuinely declines over time, such as production machinery.
Once assets are set up, go to Fixed Assets > Depreciation and click Run Depreciation for the selected period. Zoho Books calculates the charge for each active asset and posts a journal entry: debit to the relevant depreciation expense account, credit to accumulated depreciation. You can run depreciation monthly or annually depending on your reporting frequency. Running it monthly provides cleaner management accounts; annual runs are sufficient for businesses with simple asset registers.
After running depreciation, the entries appear in your general ledger. You can verify the balance sheet impact by checking that accumulated depreciation is growing correctly relative to cost, and that your P&L is charging the right depreciation expense each period. If you reconcile bank accounts regularly, the bank reconciliation in Zoho Books workflow helps confirm that asset-related payments match what has been capitalised.

When an asset leaves the business, whether sold, scrapped, or written off, you need to remove both the original cost and the accumulated depreciation from the balance sheet, and recognise any gain or loss on disposal.
To record a disposal, go to Fixed Assets, select the asset, and choose Dispose. Enter the disposal date, the proceeds received (sale price), and the account to which proceeds should post. Zoho Books calculates the net book value at the disposal date, compares it to the proceeds, and creates the appropriate journal entries automatically:
If you sell a 5-year-old vehicle originally costing 800,000 with accumulated depreciation of 600,000 for proceeds of 150,000, the net book value is 200,000. The disposal creates a loss on disposal of 50,000 that posts to your P&L.
A write-off applies when an asset has no sale proceeds: it is scrapped, stolen, or fully impaired. The process is the same as disposal but with zero proceeds. The entire net book value becomes a loss on disposal. For assets that are fully depreciated (net book value equals salvage value), the write-off removes the remaining salvage value from the balance sheet and charges it as an expense.
Some assets are partially sold or broken into components, such as a building where one floor is sold while the rest is retained. Zoho Books handles this by allowing you to enter a partial disposal percentage or a specific cost value being removed. The system calculates accumulated depreciation attributable to that portion and recognises a proportional gain or loss.
Best practice is to run depreciation up to the disposal date before recording the disposal. This ensures the accumulated depreciation balance is current and the net book value calculation is accurate. If you dispose of an asset mid-period, run a partial-period depreciation charge first, then proceed with the disposal workflow.
The reports section under Fixed Assets gives you three primary outputs for financial review, audit support, and management decision-making.
The asset register lists every asset with purchase date, cost, accumulated depreciation to date, net book value, and status (active, disposed, fully depreciated). You can filter by asset type, date range, or status. This report is the primary document auditors request at year-end, and it should reconcile to the fixed asset balances on your balance sheet. Export it to PDF or CSV for submission with financial statements.
The depreciation summary shows the depreciation charge per asset and per asset type for a chosen period. It reconciles to the depreciation expense lines on your profit and loss account. Use this report to verify that depreciation has been run for all periods and that no assets were missed. It also helps when you need to split depreciation by cost centre or department for management reporting.
The net book value (NBV) report shows the current carrying value of each asset. It is particularly useful for insurance valuations (to confirm assets are adequately covered), for financing applications where lenders want a picture of tangible assets, and for internal decisions about whether to replace or continue using ageing assets. An asset with an NBV close to its salvage value is near the end of its depreciation schedule and may need replacement planning.
For businesses registered under GST in India, the treatment of input tax credit (ITC) on fixed asset purchases requires attention.
When you purchase a capital good and receive a tax invoice from a registered supplier, you can claim ITC on the GST paid. Under GST rules, ITC on capital goods must be spread over five years (60 months), with 1/60th available each month. However, if the capital good is used exclusively for taxable supplies, you can claim the full ITC in the first year. The cost capitalised in the fixed asset register should be the cost net of recoverable ITC, since the ITC is a separate tax asset, not part of the capital cost.
When you dispose of a capital good, GST may be applicable on the transaction value if you sell it to another party. The applicable rate is typically the same GST rate that applied on the original purchase. If you have claimed ITC and dispose of the asset before five years, you are required to reverse a proportional amount of the ITC claimed. Zoho Books does not automate this reversal calculation, so you need to track it manually or via a separate reconciliation and post the reversal as a manual journal entry.
For income tax purposes in India, assets are grouped into blocks and depreciated at prescribed WDV rates rather than per individual asset. Common rates include 15% for plant and machinery, 40% for computers and software, and 30% for vehicles. These WDV rates differ significantly from the useful life assumptions under Schedule II of the Companies Act, which means most businesses maintain two depreciation calculations: one for statutory accounts (Schedule II, SLM) and one for the income tax return (Income Tax Act, WDV). Zoho Books handles the statutory calculation; your tax consultant typically handles the IT computation separately.
Can I import existing fixed assets into Zoho Books if I am migrating from another system?
Yes. Zoho Books supports bulk import of fixed assets via CSV. You can include the asset name, type, purchase date, cost, accumulated depreciation to date, and salvage value. After import, the system will use the accumulated depreciation figure you provide as the opening balance and continue calculating future depreciation from the import date forward. Review each asset record after import to confirm the depreciation method and useful life are set correctly.
What happens if I forget to run depreciation for a month?
Zoho Books allows you to run depreciation for prior periods. Go to Fixed Assets, select Depreciation, choose the period you missed, and run it. The system posts the journal entry with the date of that period. If you have already closed the accounting period, you may need to reopen it or post an adjustment. Running missed depreciation does not compound or recalculate retroactively, it simply posts the charge for the specified period at the correct rate.
How do I handle an asset that has been fully depreciated but is still in use?
Once an asset reaches its salvage value, Zoho Books stops calculating depreciation automatically. The asset remains on the register with its cost and accumulated depreciation balances intact, and its net book value equals the salvage value you set. The asset stays on the balance sheet at salvage value until you dispose of it. If you set a salvage value of zero, the asset shows at zero net book value and no further depreciation accrues.
Can Zoho Books handle assets that are partially used for business and partially for personal use?
Zoho Books does not have a built-in mixed-use split for fixed assets. The standard approach is to capitalise the full cost and then make a manual adjusting entry at year-end to transfer the personal-use portion of depreciation to a drawings or owner equity account. Alternatively, capitalise only the business-use percentage of the cost at time of purchase, though this requires clear documentation of the usage split.
Does the fixed assets module in Zoho Books integrate with the rest of the accounting ledger automatically?
Yes. Every depreciation run and disposal creates a journal entry that posts directly to the accounts mapped in the asset type configuration. You do not need to make manual journal entries for normal depreciation. The fixed asset account, accumulated depreciation account, and depreciation expense account update in real time, so your balance sheet and profit and loss always reflect the current state of your asset register without separate manual reconciliation.
Aaxonix helps finance teams configure the Zoho Books fixed assets module correctly from day one, including chart of accounts mapping, depreciation policy setup, and migration of existing asset registers. Book a free consultation to get your fixed asset management working accurately within Zoho Books.
Book a free consultationGetting Zoho Books fixed assets configured properly at the start saves significant reconciliation work later. Set up your asset types and account mappings before adding individual assets, run depreciation on a consistent monthly schedule, and use the disposal workflow rather than manual journal entries when assets leave the register. The asset register, depreciation summary, and NBV reports then give you clean, auditable numbers without the parallel spreadsheet that most businesses default to before activating this module.
Tell us what you are working through and a senior architect from our team will get back to you with a straight answer, usually within a couple of working days. No bot, no hard sell.
A senior architect will get back to you at , usually within a couple of working days. Worth checking your spam folder, just in case.
Tell us what you are actually trying to do. You will get a straight answer from a senior architect who has done this before, not a sales rep.
A senior architect will get back to you at , usually within a couple of working days. Worth checking your spam folder, just in case.
Ask it now and a senior architect will get back to you, usually within a couple of working days. It goes to our team, not a mailing list.
A senior architect will get back to you at , usually within a couple of working days. Worth checking your spam folder, just in case.